Analytical sensors and measuring systems
For a wide range of analytical parameters
- For pH, ORP, conductivity, TSS, dissolved oxygen, free chlorine, chlorine dioxide and ozone, sludge level, turbidity or multiparameter applications
- From sensors with integrated transmitter to modular panels for liquid analytical measurements
- For any industrial requirements – from hazardous areas to hygienic environments
LB 350
Radiometric online moisture analyser for bulk materials
- Accurate real-time determination of moisture content of a wide variety of bulk materials
- Not affected by temperature, conductivity, pressure, pH-value, etc.
- Measures through the vessel wall
- Can be paired with density compensation
MicroPolar LB 567/568
Microwave moisture analyser for bulk materials
- Highly accurate, non-contact system
- Also available with radiometric compensation for changes in bulk density
- Optimal production and reaction with real-time measurement
- Low-maintenance device with simple on-site calibration
Water analysis panel
Multi-parameter measuring system for water quality monitoring
- Flexibility in selecting different water parameters: dissolved oxygen, turbidity, conductivity, pH/ORP
- Installation on compact analytical modules: All measuring points at one location
- Completely pre-wired and pre-assembled for easy bypass installation
SMARTPAT PH 1590
Potentiometric pH sensor for potable, process or treated water applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: ¾ NPT (male)
- 0…14 pH; Max. +80°C / +176°F; 6.9 bar / 100 psi
- With CPVC sensor body, ceramic diaphragm and Pt1000 for temperature compensation
SMARTPAT PH 2390
Potentiometric pH sensor for municipal and industrial wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: ¾ NPT (male)
- 0…14 pH; Max. +80°C / +176°F; 6.9 bar / 100 psi
- With PPS sensor body, PTFE diaphragm and Pt1000 for temperature compensation
SMARTPAT PH 8150
Potentiometric pH sensor for chemicals and industrial wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- 0…14 pH; Max. +130°C / +266°F; 12 bar / 174 psi
- Glass sensor with open diaphragms and Pt1000 for temperature compensation
SMARTPAT PH 8320
Potentiometric pH sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- 0…14 pH; Max. +70°C / +158°F; 10 bar / 145 psi
- Glass sensor with PTFE diaphragm and Pt1000 for temperature compensation
SMARTPAT PH 8530
Potentiometric pH sensor for pure water and low conductivity media (>2 μS/cm)
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- 0…14 pH; Max. +80°C / +176°F; 12 bar / 174 psi
- Glass sensor with 3 ceramic diaphragms and Pt1000 for temperature compensation
SMARTPAT PH 8570
Potentiometric pH sensor for food, beverage and pharmaceutical applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- 0…14 pH; Max. +140°C / +284°F (SIP/CIP); 12 bar / 174 psi
- Autoclavable glass sensor with ceramic diaphragm and Pt1000 for temperature compensation
SMARTPAT ORP 1590
Potentiometric ORP sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: ¾ NPT (male)
- -1500…+1500 mV; Max. +80°C / +176°F; 6.9 bar / 100 psi
- Sensor with CPVC body, platinum electrode, ceramic diaphragm and Pt1000 temperature sensor
SMARTPAT ORP 8150
Potentiometric ORP sensor for chemicals and industrial wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- -1500…+1500 mV; Max. +130°C / +266°F; 12 bar / 174 psi
- Glass sensor with platinum electrode, open diaphragm and Pt1000 temperature sensor
SMARTPAT ORP 8510
Potentiometric ORP sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- -1500…+1500 mV; Max. +70°C / +158°F; 2 bar / 30 psi
- Glass sensor with platinum electrode, ceramic diaphragm and Pt1000 temperature sensor
Showing 12 of 47