Leakage, pressure and hipot testing of Coriolis mass flowmeters
Mandatory pre-delivery testing and inspection for the highest level of occupational safety and flowmeter integrity
Challenge
Weld seams along the stem, the flow splitter, the secondary containment or the outer casing are potential weak spots of Coriolis mass flowmeters. Rigorous testing and inspection is required to ensure that these cannot turn into leakage points.
Solution
In order to not only specify but also prove the highest level of safety prior to delivery, all OPTIMASS Coriolis mass flowmeters undergo mandatory safety tests including helium leak detection, high potential (electrical safety) and pressure tests as standard and for any application.
Safety benefits
In-house safety testing of all Coriolis mass flowmeters provides extra safety ex works
Monitoring of potential leakages for all OPTIMASS Coriolis flowmeters prior to shipping
Helium leakage tests for detecting any leakage from welds (e.g. of the stem, flow splitter, secondary containment or outer casing of Coriolis mass flowmeters)
化学産業におけるコリオリ流量計
低流量および定量用途用向けコリオリ質量流量計
一般用途およびプロセス制御向けコリオリ質量流量計
先端プロセス用途向けコリオリ質量流量計
大容量バルク計測向けコリオリ質量流量計
先端プロセス用途向けコリオリ質量流量計