Analytical sensors and systems for inline measurement of inductive and conductive conductivity
Multi-parameter measuring system for water quality monitoring
- Flexibility in selecting different water parameters: dissolved oxygen, turbidity, conductivity, pH/ORP
- Installation on compact analytical modules: All measuring points at one location
- Completely pre-wired and pre-assembled for easy bypass installation
Conductive conductivity sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male)
- 0.1…20 mS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes and Pt1000 for temperature compensation
Conductive conductivity sensor for condensate, process, boiler feed or (ultra)pure water
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male), ¾ NPT (male)
- 0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes and Pt1000 for temperature compensation
Conductive conductivity sensor for chemicals and industrial wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male), ¾ NPT (male)
- 10 μS…15 mS/cm; Max. +130°C / +266°F; 16 bar / 232 psi
- With graphite electrodes and Pt1000 for temperature compensation
Conductive conductivity sensor for food, beverage and pharmaceutical applications
- 2-wire loop powered, 4…20 mA/HART®7, for direct connection to a PCS
- Process connection: VARIVENT® N, Tri-Clamp 1½", 2"
- 0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes (Ra <0.8 μm) and Pt1000 for temperature compensation
Conductive conductivity sensor for water and treated wastewater applications
- For use with analytical transmitter
- Process connection: G½ (male, sensor rear end) for immersion installation
- 1 μS/cm…20 mS/cm; Max. +90°C / +194°F; 16 bar / 232 psi
- With two stainless steel electrodes (1.4571 / 316Ti), PP sensor body and Pt100 for temperature compensation
Conductive conductivity sensor for pure and process water with high temperatures and pressures
- For use with analytical transmitter
- Process connection: ¾ NPT (male) for insertion installation
- 1…1000 μS/cm; Max. +200°C / +392°F; 40 bar / 580 psi
- With stainless steel electrodes and sensor body (1.4404/316L), Pt100 for temperature compensation
Conductive conductivity sensor for industrial water, wastewater and chemical applications
- For use with analytical transmitter
- Process connection: G¾, G1 (male), ¾ NPT (male) for insertion installation
- 0.01…15 mS/cm; Max. +130°C / +266°F; 16 bar / 232 psi
- With graphite electrodes and Pt100 for temperature compensation
Conductive conductivity sensor for food, beverage and pharmaceutical applications
- For use with analytical transmitter
- Process connection: Clamp DN25-40, 1½″
- 0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- Extra slim design with ∅16 mm / 0.63″ stainless steel electrodes, 115 mm / 4.53″ installation length, temperature sensor and M12 connector
Inductive conductivity sensor for water, wastewater and chemical applications
- For use with analytical transmitter
- Process connection: G1½ union nut and immersion versions
- 1…2000 mS/cm; Max. +100°C / +212°F
- Electrodeless conductivity sensor with Pt1000 for temperature compensation
Inductive conductivity measuring system for food and beverage applications
- 4-wire, 4…20 mA, with head-mounted or remote transmitter
- Process connection: G1 for hygienic adapters
- 0.05…1000 mS/cm; Max. +140°C / +285°F; 25 bar / 362 psi
- Hygienic PEEK sensor, robust (IP69K), with temperature compensation
Inductive conductivity sensor for food and beverage applications
- For use with analytical transmitter
- Process connection: G1½ (male, non-hygienic)
- 0.5…2000 mS/cm; Max. +125°C / +257°F (for SIP/CIP); 10 bar / 145 psi
- Sterilisable PEEK sensor (FDA and EC1935/2004 conform) with temperature compensation