OPTIFLUX 4000

Electromagnetic flow sensor for combination with IFC 050, IFC 100, IFC 300 and IFC 400 signal converters

Full bore design: pipe cross-section without restrictions
Connection sizes: DN2.5…3000 / ⅒…120" (depending on signal converter)
Liner: PTFE, PFA, ETFE, PU, hard and soft rubber

OPTIFLUX 4000 Elecromagnetic flow sensor — OPTIFLUX 4000

Electromagnetic flow sensor for combination with KROHNE IFC signal converters — OPTIFLUX 4000 – Stainless steel version

Overview

The OPTIFLUX 4000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100, IFC 300 or IFC 400 signal converters it forms the OPTIFLUX 4050, OPTIFLUX 4100, OPTIFLUX 4300 and OPTIFLUX 4400 electromagnetic flowmeters for basic to advanced applications with aggressive and abrasive media or other conductive liquids.

Related products

OPTIFLUX 4400 C – Compact version of KROHNE electromagnetic flowmeter with PFA liner

Electromagnetic flowmeter for safety instrumented systems (SIS) and high-accuracy requirements

Certified for safety applications up to SIL 2/3, with automated partial proof test capability for extended proof test intervals
Best-in-class diagnostic test interval incl. fault response time of only 2 minutes
SIL 2/3 up to DN600 / 24"; non-SIL up to DN2000 / 80" (larger on request)
Pulse, frequency, status, 4…20 mA, HART^®7

View product details

OPTIFLUX 4050 C Electromagnetic flowmeter – Compact version

Electromagnetic flowmeter for basic applications with abrasive and aggressive liquids

Chemically resistant liner materials
With extra isolation of electronics for use in high humidity areas
Flange: DN2.5…1200 / ⅒…48", max. PN40 / ASME Cl 600
4…20 mA, pulse, frequency, status, HART^®, Modbus

View product details

OPTIFLUX 4100 C Electromagnetic flowmeter – Compact version

Electromagnetic flowmeter for standard applications with abrasive and aggressive liquids

Chemically resistant, for liquids (>5 μS/cm) with solid content (≤10%)
Up to +180°C / +356°F
Flange: DN2.5…1200 / ⅒…48", max. PN40 / ASME Cl 600
4…20 mA, pulse, frequency, status, HART^®

View product details

OPTIFLUX 4300 C Electromagnetic flowmeter – Compact version

Electromagnetic flowmeter for advanced process and custody transfer (CT) applications

High accuracy (±0.2%), certified for custody transfer
For low conductivity media (>1 μS/cm) and high solid contents (≤70%)
Flange: DN2.5…3000 / ⅒…120", max. PN40 / ASME Cl 600 (higher on request)
3 x 4…20 mA, HART^®,Modbus, FF, Profibus-PA/DP, PROFINET

View product details

IFC 300 Electromagnetic flow converter – Remote field housing version

Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors

Compact, remote field, wall-mounted and rack-mounted housing
With extensive diagnostics for advanced requirements (NE 107)
4-wire, 3 x 4…20 mA, HART^®, Modbus, FF, Profibus-PA/DP, PROFINET etc.

View product details

Compact version of the IFC 400 electromagnetic flow converter

Electromagnetic flow converter for combination with OPTIFLUX 4000 electromagentic flow sensor

SIL2/3 certified for use in safety integrated systems (SIS)
Compact or remote field housing
With extensive diagnostics for advanced requirements (NE 107)
4-wire, pulse, status, frequency, 3 x 4…20 mA, HART^®7

View product details

IFC 100 W Elecromagnetic flow converter – Version in wall-mounted aluminium housing

Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors

Compact and wall-mounted housing
With many sensor and process diagnostics for standard requirements
4-wire, 4…20 mA, pulse, frequency, status, HART^®

View product details

IFC 050 W Elecromagnetic flow converter – Remote version in wall housing with display

Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors

Compact and wall-mounted housing (with or without display)
With sensor and process diagnostics for basic requirements
4-wire, 1 x 4…20 mA, pulse, frequency, status, HART^®, Modbus etc.

View product details