UFM 800 W + C and
Hot Tapping for water and wastewater

Efficient flow measurement and volume counting of all types of water and wastewater in closed pipelines or in open channels and raceways.

Weld-in sensors for metal pipelines (W, also with Hot Tapping)
Built-on or built-in sensors for open channels (C)



Advantages

	No constriction of the pipe cross-section
	No additional pressure drop
	Electrical conductivity, pressure, density, etc. have no effect on measurements
	Easy to install from outside or inside
	No maintenance
	Low power consumption
	Low operating costs

UFM 800 W

Ultrasonic flowmeters with UFS 800 W sensors for measuring the volumetric flowrate in metal pipelines. The sensors are welded to the outside of the pipelines.

	Single-beam measurement, optional double and triple beam
	Protection category IP 65/67/68, NEMA 4/4X/6
	For DN 500 - 5000 / 20" - 200"
	Flowrates: 350 -1.270.000 m3/h or 770 - 5.600.000 US GPM equivalent flow velocity: 0.5 - 18 m/s or 1.5 - 54 ft/s
	For process temperatures up to 180°C / 356°F
	For pressures up to 40 bar / 580 psig

UFM 800 C

Ultrasonic flowmeter with UFS 800 C sensors for measuring flow velocity in open channels. The sensors can be installed or mounted from the inside or outside of the channel.

	Single-beam measurement
	Protection category IP 65/67/68, NEMA 4/4X/6
	For DN 400 - 8000 / 16" - 320"
	Flowrates: 230 -3.250.000 m3/h or 500 - 14.300.000 US GPM equivalent flow velocity: 0,5 - 18 m/s or 1,5 - 54 ft/s
	For process temperatures up to 120°C / 248°F
	For pressures up to 10 bar / 150 psig
	Accuracy < ±5 % of measured value, depending on application

UFC 030 F signal converter

	Large local LC display and push buttons
	Digital signal processing
	Easy to operate
	Current, pulse, frequency and status outputs
	Low power consumption

Downloadcenter

UFM 800 W + C

UFM 800 W Hot Tapping

Hot Tapping technology allows retrofitting onto existing pipelines without interrupting the process.

UFM 800 W Hot Tapping ultrasonic flowmeters are designed for volumetric flow measurement and counting in closed pipelines with inside diameters of DN 500 ? DN 5000.
UFM 800 W Hot Tapping flowmeters are suitable for all sectors of the water and wastewater industry.
The UFM 800 W is the device of choice in many other industrial sectors.