Modular Converter MFC 050 / MFC 051

Universal converter for OPTIMASS 3000 | 7000 | 8000 | 9000 | and OPTIGAS One tube No limits OPTIMASS stands for simplicity. It cuts down all previous limitation in Coriolis mass metering. Even the new converters, MFC 050 and MFC 051 fit on all current and future models.

No limits through Intuitive user interface software

Easy to program with intuitive software Simple to commission; zero calibration and output configuration

No limits with serviceability

	?Intelligent? digital link with front end will update sensor calibration data if converter is exchanged
	Common converters for all sensor designs, reduces spare parts stockholding Sensor diagnostics
	Concentration measurement options

No limits with installation

Compact or remote installation: easy to convert meter on-site with conversion kit

MFC 050
Provides the user with a choice of multiple outputs (up to 4) in hazardous and non-hazardous designs. The outputs are galvanically isolated from the power supply, but not from each other, and use a common ground.
The first current output is fitted with HART® as standard, except in the case where a serial communication is fitted e.g. Modbus.
The current (mA) output is active (converter powered). Pulse and control inputs are passive (externally powered). The status output is either active or passive, depending on output options fitted.

MFC 051
This converter has passive outputs and provides intrinsically safe signals for the hazardous area version. There is also available a safe area version with passive output signals. The outputs are galvanically isolated from the power supply and from each other.
In this design only two inputs or outputs are available at any time. This converter also provides the possibility of utilising multi-drop HART®. Profibus PA and Foundation Fieldbus (pending) are also available on this converter.

Downloadcenter

MFC 050 | MFC 051