HomeCompanyProductsIndustriesServiceDownloadNewsCountriesContact

 
EMF / Magmeters
Variable Area Flowmeters
Ultrasonic Flowmeters
Mass Flowmeters
Vortex Flowmeters
Flow Controllers
Level Measurement
Application areas
Non-Contact Measurement
Contact Measurement
Level Switches
Other Level Gauges
BM 26
BM 500
BW 25
Tank Management
Temperature & Pressure
Analysis
Batching Controller
Complete Batching Systems
Exi Controller
Exi Indicator
Communications
Loading Software

BM 26




BM 26 A

Stainless Steel Bypass Level Indicators


BM 26 A >
BM 26 BASIC | BM 26 ADVANCED >
BM 26 F | BM 26 W >
Measuring Principle >


Reliable level or interface measurement of any liquid, even flammable, toxic and corrosive (optional NACE conformity)
Robust, stainless steel design for a high level of safety in extreme operating conditions
No power required - permanent, easy to read IP 68 local indication
High reliability with reduced installation and maintenance cost


BM 26 A
This indicator operates over a wide temperature range and at high pressures. It is also the perfect device for restricted spaces. The PTFE lined version can be used with acids.




BM 26 BASIC | BM 26 ADVANCED




BM 26 BASIC | BM 26 ADVANCED
These two indicators use the same proven technology as other devices in the BM 26 range and offer the best price/performance ratio. Their optimal design keeps weight to a minimum.

The BASIC version is ideal for measuring liquids in low-pressure storage and process tanks.

The ADVANCED version, designed for chemical or petrochemical processes, indicates the level of hydrocarbons in refining applications etc. It is also available as BM 26 ADVANCED / W, integrating the OPTIWAVE for high accuracy and/or redundant level indication.

Highlights BM 26 BASIC | ADVANCED
Temperature range: -200…300°C / -325…+570°C (*)
Pressure range: -1…120 bar / -14.5… 1740 psig (*)
Density range: 0.47…3 kg/l / 29.3…187.3 lb/ft3 (*)
Measuring up to: 6 m / 19.68 ft (*)
Float material: 316L, 316Ti, Titanium (*)
Stainless steel scale with wide choice of markings: m/cm, ft/in, %, volume
Ideal for tanks with obstructed environments
ATEX approved
Optional ER, Radar and TDR transmitters for remote control
Variety of process connections, special materials, valves, insulation

(*) others possible on request



Industries
Chemical
Oil and Gas
Petrochemical
Water

Applications
Boilers
Condensators
Hydrocarbons and Separators
Liquid gas
Process and storage tanks
Stream cracking




BM 26 F, BM 26 W



BM 26 F | BM 26 W
These devices are mostly used for optimized accuracy and/or redundant measurement.

BM 26 F integrates the OPTIFLEX 1300 C Guided Radar (TDR) Level Meter for distance, level and volume measurement of liquids and liquid/liquid interface.

BM 26 W integrates the OPTIWAVE 7300 C FMCW Radar Level Meter for distance, level and volume measurement of liquids. It can measure level in a variety of difficult conditions.



Measuring principle
The BM 26 operates on the principle of communicating vessels. The measuring chamber is connected adjacent to the tank so that the same conditions are obtained in the chamber as those in the tank.

The float is equipped with a system of permanent magnets to transmit measured values to the local indicator.

The magnet system of the float activates either the magnetic flaps according to the liquid level, or a movable follower magnet in the indicating section of the indicator depending on the method of indication chosen.

The column of reversed yellow magnetic flaps, or the vertical position of the follower magnet, indicates the liquid level.



Downloadcenter


BM 26 Series